Firewall Entry Level 4 NIC APU4 based 2GB RAM

€256.61

Small hardware platform, Completly fanless, Power Consumption: 10 Watt, Motherboard APU4 - 2GB RAM. In order to test the device, you need a null modem cable. It’s extremely necessary for debugging and reset.

The package includes: Appliance, Power cable

Availability: In stock
SKU
AP4FEL42_20
Firewall Entry Level 4 NIC APU4 based 2GB RAM Integrated completely fanless router / firewall hardware platform. Main board: - apu4d2 - 4GB DDR3-1333 DRAM - ùStorage: Boot from SD card (internal sdhci controller), external USB or m-SATA SSD. 1 SATA + power connector - Jack = 2.5 mm, center positive - 4 Gigabit Ethernet channels (i211AT Intel Chipset) - I / O: DB9 serial port, 2 USB 3.0 external + 2 USB 2.0 internal, three front panel LEDs, pushbutton - Firmware: CoreBoot Processor: - AMD Embedded G series GX-412TC - 1 GHz quad Jaguar core with 64 bit and AES-NI support - 32K data + 32K instruction cache per core - shared 2MB L2 cache Chassis: Aluminum Power: - AC adapter with euro plug - Input voltage 100-240 V AC, 50/60 Hz - Output voltage 12 V DC, maximum current 2A - High efficiency - Jack 2.5mm inner diameter, 5.5mm outer diameter, positive center. Consumption: 12V DC, approximately 6 Watts to 12 Watts depending on the CPU load Drive Bay: Storage: 16 GB mSATA SSD module, MLC flash Expansion Slot: - 2 miniPCI express (one with SIM socket) - LPC bus - GPIO header - I2C bus - COM2 (3.3V RXD / TXD) Ventilation: Conductive cooling from the CPU and south deck to the enclosure using a 3mm aluminum heat spreader (included). Front Panel: Three LEDs on the front panel Power supply 10 Watt Dimensions: 168mm x 157mm x 30mm (W x D x H) Available Colors: Black
We found other products you might like!