Firewall Entry Level 3 NIC APU2 based 4GB RAM

€260.95

Small hardware platform, Completly fanless, Power Consumption: 10 Watt, Motherboard APU2 - 4GB RAM. In order to test the device, you need a null modem cable. It’s extremely necessary for debugging and reset.

The package includes: Appliance, Power cable

Availability: In stock
SKU
AP2FEL34_19

Product Name: Firewall Entry Level 3 NIC APU2 based 4GB RAM
Description: Integrated completely fanless router / firewall hardware platform
Main board: apu2e4;
. 4GB DDR3-1333 DRAM ECC;
. Storage: Boot from SD card (internal sdhci controller), external USB or m-SATA SSD. 1 SATA + power connector;
. Jack = 2.5 mm, center positive;
. 3 Gigabit Ethernet channels (i211AT Intel Chipset);
. I / O: DB9 serial port, 2 USB 3.0 external + 2 USB 2.0 internal, three front panel LEDs, pushbutton;
. Firmware: CoreBoot.
Processor: AMD Embedded G series GX-412TC, 1 GHz quad Jaguar core with 64 bit and AES-NI support, 32K data + 32K instruction cache per core, shared 2MB L2 cache.
Chassis: Aluminum
Power supply: AC adapter with euro plug;
. Input voltage 100-240 V AC, 50/60 Hz;
. Output voltage 12 V DC, maximum current 2A;
. High efficiency;
. Jack 2.5mm inner diameter, 5.5mm outer diameter, center positive.
Consumption 12V DC, from about 6 Watts to 12 Watts depending on the CPU load
Drive Bay Storage: 16 GB mSATA SSD module, MLC flash
Expansion Slots: Expansion: 2 miniPCI express (one with SIM socket), LPC bus, GPIO header, I2C bus, COM2 (3.3V RXD / TXD)
Ventilation: Conductive cooling from the CPU and south deck to the enclosure using a 3mm aluminum heat spreader (included).
Front Panel: Three LEDs on the front panel
Power supply: 10 Watts
Dimensions: 168mm x 157mm x 30mm (W x D x H)
Available Colors: Red / Black / Blue