Nano Cluster APU4D 4GB


Two small hardware platforms, Completly fanless, Power Consumption: 10 Watt each, Motherboard APU4 - 4GB RAM. In order to test the device, you need a null modem cable. It’s extremely necessary for debugging and reset

The package includes: Appliance, Power cable

Out of stock
1 Product Name Nano Cluster APU4D 4 GB
2 Description 2x Integrated completely fanless router / firewall hardware platform
3 Main board . apu4D4;
. 4 GB DDR3-1066 DRAM;
. Storage: Boot from SD card (internal sdhci controller), external USB or m-SATA SSD. 1 SATA + power connector;
. Jack = 2.5 mm, center positive;
. v4 Gigabit Ethernet channels (Intel i211AT on apu2b2, i210AT on apu2b4);
. I / O: DB9 serial port, 2 USB 3.0 external + 2 USB 2.0 internal, three front panel LEDs, pushbutton;
. Firmware: CoreBoot.
4 Processor AMD Embedded G series GX-412TC, 1 GHz quad Jaguar core with 64 bit and AES-NI support, 32K data + 32K instruction cache per core, shared 2MB L2 cache
5 Chassis Aluminum
6 Power . AC adapter with euro plug;
. Input voltage 100-240 V AC, 50/60 Hz;
. Output voltage 12 V DC, maximum current 2A;
. High efficiency;
. 2.5mm inner diameter jack, 5.5mm outer diameter, center positive.
7 Consumption 12V DC, approximately 6 Watts to 12 Watts depending on CPU load
8 Drive Bay Storage: 16 GB mSATA SSD module, MLC flash
9 Expansion Slots Expansion: 2 miniPCI express (one with SIM socket), LPC bus, GPIO header, I2C bus, COM2 (3.3V RXD / TXD)
10 Ventilation Conductive cooling from the CPU and south deck to the enclosure using a 3mm aluminum heat spreader (included).
11 Front Panel Three LEDs on the front panel
12 Power supply 10 Watts each
13 Dimensions 168mm x 157mm x 30mm (W x D x H) each
14 Available Colors Black